How Macoma™ PADS’s Installed

How Macoma™ PADS’s Installed

INTERIOR

When installed indoors, Macoma™ PADS is an easy to install two part system that includes a water-based film and UV light and ventilation fixtures

The water-based Macoma™ PADS Titanium dioxide film is 100% safe and non-toxic. Simply paint the film onto the ceiling with a roller, brush or low pressure sprayer like traditional paints. Three coats are recommended with 10 to 20 minutes of drying time between each coat. If a primer is needed before applying the film, use a water based primer product such as KILZ commonly found in hardware stores.

Wall mounted UV light and venilation fixtures are mounted just below the ceiling, one fixture for every 1000 square feet of area. The fixtures provide enough UV light to power the Macoma™ PADS film’s air purifying photocatalytic effect. Built in fans push air up to the ceiling and Macoma™ PADS film where it can be purified. If the room is well lit with natural sunlight less fixtures may be required than in a room with less sunlight.

Easy to install

Non-toxic

UV light to power

EXTERIOR

When installed outside, only the Macoma™ PADS film is required! The film is applied using the same rollers, brushes and low pressure sprayers as traditional paint jobs

The virus, bacteria and pollution-destroying powers of the film will be immediately powered by the sun’s strong UV rays!

100 %

Safe and Non Toxic

WHO CAN INSTALL?

Macoma™ PADS must be installed by a trained and certified team. We make this easy by providing a number of options:

  • We will connect you with a certified installer in your area
  • A NANO Tech Safe expert will come to your facility and train your facilities team to install and maintain the system.
  • A NANO Tech Safe expert will come to your building and supervise the installation using contractors you or the expert choose.
open
Protect yourself from COVID variants of today and tomorrow by installing Macoma™ PADS NOW!